Gedore TBN 2 Breaking Torque Wrench, Captive Pin Drive, 0.4 – 2.0 Nm

Controlled screw tightening in the range of 0,4 – 2 Nm
Ideally suited for serial or production-line use
Direct fastening of the insert in the key through the CP interior mount reduces the overall length
No adjustment scale – requires a torque tester in order to set the desired fixed torque value
For bi-directional controlled tightening
Breaking of the handgrip by 20 degrees when the pre-set torque value is achieved makes over-tightening unlikely
Lightweight, robust and corrosion-resistant construction design
OAL: 105 mm

Note: this is the torque wrench only. Captive pin end fittings are sold separately.